Swimming Pool Systems
SWIMMING POOL ENVIRONMENT CONTROL SOLUTIONS
Swimming Pool Environment and Condensation Control with an “Air to Air” Heat Exchanger
When this indoor pool was built in a luxury Canterbury home, special consideration was given to the issues of humidity and condensation and the structural damage that damp can cause.
Ventilation is the solution, and by utilising a system which contained an “Air to Air” heat exchanger, which recycles the heat from the exhaust air to warm the incoming air, heating costs were kept down.
This “Heat Recovery Ventilation (HRV)” system was designed to be fully automatic, switching between three operating modes (see links on the left) as circumstances dictated.
This example is a private pool in a luxury home but the same problems are encountered in larger public pools.
Equally, similar solutions can be reached. The performance charts (see links on the left) refer to a number of swimming pools throughout the country where we have installed HRV systems.
Ventilation is one solution to humidity problems, and “Heat Recovery Ventilation” by re-cycling energy makes the most sense, both economically and ecologically.
Avon Electric Ltd can also design and supply a mechanical dehumidification system, tailor made to suit your needs.
SWIMMING POOL HEAT RECOVERY
Automatic Heating, Ventilation & Heat Recovery System Operation
“Recirc” Mode
The ventilation system automatically functions in “Recirc” mode whenever the Pool Hall environment is within the set points of the Humidistat and Room Thermostat. In “Recirc” mode the Room Thermostat maintains air temperature relatively close to the thermostat set point, which should be 1 or 2 deg C above the water temperature,to minimise condensation. An automatic timer may override the “Recirc” mode to ensure the Heat Exchanger does not operate in “Recirc” mode for long periods. Its purpose is to switch the system to Heat Exchange mode at regular intervals, regardless of other conditions to ensure Indoor Air Quality is maintained (i.e. free of chlorine odour and low in humidity).
“Heat Exchange” Mode
When Humidity exceeds the Humidistat set point, the “Recirc Damper closes and the ventilation system operates in the “Heat Exchange” mode. In this mode, temperature control is transferred to a three stage Air Off Thermostat which tops up the temperature of the fresh air after it has passed through the Heat Exchanger. This thermostat senses and controls the temperature of the air entering the Pool Hall. When indoor humidity falls below the Humidistat set point, the Recirc Damper automatically reverts to “Recirc” mode.
“Summer By-pass” Mode
If the Pool Hall air temperature exceeds the set point of the Room Thermostat by, say, 3 – 4 deg C (due to solar gain on a hot summers day), the Summer By-pass Thermostat automatically opens the Summer By-pass damper. This causes exhaust air to by-pass the heat exchanger and prevents heat recovery from “over heating” the Pool Hall. When the Pool Hall temperature falls to within 1 – 2 deg C of the Room Thermostat set point (i.e. after the heat of a hot summers day has reduced) the Summer By-pass damper automatically closes and the ventilation system reverts to the “Recirc” mode.
MECHANICAL DEHUMIDIFICATION FOR SWIMMING POOLS
Alternative Dehumidification Options using Calorex Dehumidifiers
Calorex offer a range of heat pump and dehumidification solutions for swimming pools.
SWIMMING POOL CASE STUDIES
Talk to us today
Avon Electric Ltd
25 Taurus Place, Bromley
P.O Box 19748
Christchurch, NZ
Email: [email protected]
Free Call: 0800 379 247
Ph: (03) 381 5595
Fx: (03) 381 5596